1001*1; Set the mds 3.0 quality measures user's manual v6.0 CD-R tray, and press the Resume/Cancel button.
Or, with the print head installed, turn the printer off and.
CD-R tray guide open (during printing to paper).3 times : Paper jam.Protect the paper output slot from exposure to excessive light.1841*2; Close crack detection in steel rolls the inner cover, and press the Resume/Cancel button.6 times : Inner cover open.4 times: No ink.1601 / 1611 / 1612 / 1613; Replace the empty ink tank(s or press the Resume/Cancel button.Pressing the Resume/Cancelbutton will exit the error without ink tank replacement, however, ink may run out during printing.Printing will resume from on the front side of the next page.The service call error, indicating the waste ink absorber is full, is likely to occur soon.(ASF) 1000; Set the paper in the ASF, and press the Resume/Cancel CD-R tray.Install the print head properly, and close the access cover.2001; After removing the cable between the camera and the printer, press the Resume/Cancel button, and re-connect the cable.5 times : The print head is not installed 1401, or it is not properly installed (eeprom data of the print head is faulty) 1403 /1405.1700; Pressing the Resume/Cancel button will exit the error, and enable printing.1003; Set the paper in the cassette, and press the Resume/Cancel button.10 times : Automatic duplex printing cannot be performed (paper size not supported).
No paper in the cassette.1310; Press the Resume/Cancel button to eject the paper being used at error occurrence.Inner cover open (during printing on paper).CD-R tray properly, and press the Resume/Cancel button.1851 /1856*1; Close the CD-R tray guide, and press the Resume/Cancel button.1846*2; Close the inner cover, and press the Resume/Cancel button.8 times : Warning: The waste ink absorber becomes almost full (approx.2500; Press the Resume/Cancel button, and after confirming the following, perform print head alignment again: - Set an appropriate type and size of paper (plain paper, A4 or letter).In repair servicing, replace the bottom case unit (QM2-1249 or the ink absorbers (QC1-4222 / 4223 / 4224 / 4263 / 4264 / 4864).1250; Open the paper output tray.1200; Close the access cover.Paper jam in the under guide.Paper jam in the rear guide.1303.LED Blinking in Orange and Green Alternately, or Lit in Orange: formula 1 logo full version game 2 times : Carriage error 5100 3 times : Paper feed error 6000 4 times : Purge unit error 5C00 5 times : ASF (cam) sensor error 5700 6 times : Internal temperature error.9 times : The connected digital camera or digital video camera does not support Camera Direct Printing.CD-R tray guide closed (during CD-R printing).1850 / 1855*1; Open the CD-R tray guide, set the.
95 of the maximum capacity).
1300; Remove the jammed paper, and press the Resume/Cancel button.
1002 After setting a CD-R or DVD-R in the tray, set the tray in the tray guide, and press the Resume/Cancel button.